Search Products
Shop By Model:

26-200, DRIVER SPORTBOARD, 2023 and OLDER K1600GT / GTL / GTLE, K1600B, IRON GLIMMER

Price:
$445.00
26-200
BMW motorcycle floorboards are floorboards designed specifically for BMW motorcycles K1600GT / GTL / GTLE and K1600B. These footboards offer increased leg room and comfort. The driver floor boards relocate your foot position 1 ¾" lower than stock allowing increased leg room and comfort. The floor boards measure 9"x 4", offering comfort, support and a variety of foot positions as you ride. The installation of these custom after market BMW motorcycle parts is a simple bolt on procedure. The floorboards are made of 6061 aluminum then powder coated in an Iron Glimmer. Screws are stainless steel.
  • New Releases from Ilium Works

    Ilium Works is proud to announce the 29-200 HIGHWAY PEGS for the R1250 GS Adventure.

    The factory engine guard bar configuration has presented quite a challenge when it comes to properly mounting a comfortable highway peg. Our new part number 29-200 Highway Pegs address this problem with a unique mounting system. A gracefully curved 1/4" X 1” stainless steel bar connects the upper and lower bars of the factory engine guard and provides a sturdy foundation to mount the highway pegs in the proper location.

     

     

     

     

    The 29-300 GSA Highway peg is offered with the Gripper pad.

     

     

     

     

     

     

    Carefully designed Rear Crash Bars to help protect your expensive panniers and mufflers, these minimalist design bars will not interfere with passenger comfort or the clean lines of your R1200RT Oil head, R1200RT Water Cooled, R1250RT or K1600GT / GTL / GTLE.

                                                                                                                                                                                                                                                       These Rear Guard Bars, Part# 11-800BL are designed to work in conjunction with our P/N 19-600 Highway Pegs to offer the best overall protection for your 2005 – 2013 R1200RT in the event of a drop or tip over. These can also be used in conjunction with other manufacturer’s engine guard bars as well. These bars are constructed of heavy wall (1” X .120” ) steel tubing and TIG welded to 7 ga. cold rolled steel brackets. After shot blasting with stainless steel media, these bars are powder coated for a durable and trouble free finish in Satin Black for a subtle look.

     

     

     

     

     

     These Rear Guard Bars, Part# 30-800 / 30-800BL are designed to work in conjunction with our P/N 30-200 / 30-200BL (R1200RTW) or 36-200 / 36-200BL (R1250RT) Engine Guard Bars to offer the best overall protection for your R1200RT WATER COOLED or R1250RT in the event of a drop or tip over.  These can also be used in conjunction with other manufacturer’s engine guard bars as well.  These bars are constructed of heavy wall  (1” X .120” ) steel tubing and TIG welded to 7 ga. cold rolled steel brackets.  After shot blasting with stainless steel media, these bars are powder coated for a durable and trouble free finish in either Silver Metallic to complement the frame colors, or Satin Black for a more subtle look.

     

     

     

     These Rear Guard Bars, Part# 26-900 / 26-900BL are designed to work in conjunction with our P/N 26-500 / 26-500BL Engine Guard Bars to offer the best overall protection for your K1600 in the event of a drop or tip over.  These can also be used in conjunction with other manufacturer’s engine guard bars as well.  These bars are constructed of heavy wall  (1” X .120” ) steel tubing and TIG welded to 7 ga. cold rolled steel brackets.  After shot blasting with stainless steel media, these bars are powder coated for a durable and trouble free finish in either Iron Glimmer to complement the frame colors, or Satin Black for a more subtle look.

Powered By Zomix Content Management Systems copyright © 2024