10-500, OIL FILTER WRENCH, BMW

Choose a Model to start shoping!

Please refer to the 10-500 / 10-700 comparison drawing to determine which wrench will properly fit your bikes filter.

This custom made oil filter wrench for your BMW motorcycle is CNC machined from 6061 aluminum then black anodized. Easily remove and install oil filters on the R1200GS, R1200R, R1200RT, R1200RT-P, R1200ST, R1200S, F650, F650CS, F650GS, F800GS, F800R, F800S, F800ST, K1200R, K1200S (‘06 OR LATER) or K1200GT (‘06 OR LATER), K1600GT and K1600GTL. Can be used with either an 3/8" ratchet or 19mm wrench.

HIGHWAY PEGS for the R1250 GS Adventure

Ilium Works is proud to announce the 29-200 HIGHWAY PEGS for the R1250 GS Adventure.

The factory engine guard bar configuration has presented quite a challenge when it comes to properly mounting a comfortable highway peg. Our new part number 29-200 Highway Pegs address this problem with a unique mounting system. A gracefully curved 1/4" X 1” stainless steel bar connects the upper and lower bars of the factory engine guard and provides a sturdy foundation to mount the highway pegs in the proper location.

29-300 GSA Highway Peg

The 29-300 GSA Highway peg is offered with the Gripper pad.

R1200RT Rear Crash Bars

Carefully designed Rear Crash Bars to help protect your expensive panniers and mufflers, these minimalist design bars will not interfere with passenger comfort or the clean lines of your R1200RT Oil head, R1200RT Water Cooled, R1250RT or K1600GT / GTL / GTLE.These Rear Guard Bars, Part# 11-800BL are designed to work in conjunction with our P/N 19-600 Highway Pegs to offer the best overall protection for your 2005 – 2013 R1200RT in the event of a drop or tip over. These can also be used in conjunction with other manufacturer’s engine guard...

R1200RT Rear Guards

These Rear Guard Bars, Part# 30-800 / 30-800BL are designed to work in conjunction with our P/N 30-200 / 30-200BL (R1200RTW) or 36-200 / 36-200BL (R1250RT) Engine Guard Bars to offer the best overall protection for your R1200RT WATER COOLED or R1250RT in the event of a drop or tip over. These can also be used in conjunction with other manufacturer’s engine guard bars as well. These bars are constructed of heavy wall (1” X .120” ) steel tubing and TIG welded to 7 ga. cold rolled steel brackets. After shot blasting with stainless steel media, th...