Motorcycle
Motorcycle
BMW motorcycle floorboards are floorboards designed specifically for BMW motorcycles 2014 and up water or liquid cooled R1200RTW and R1250RT. These NEW "sleek looking" footboards offer increased leg room and comfort. The driver floorboards relocate your foot position 1 ¾" lower than stock allowing increased leg room and comfort. The floorboards measure 9"x 4", offering comfort, support and a variety of foot positions as you ride. The installation of these custom aftermarket BMW motorcycle parts is a simple bolt on procedure. The floorboards are made of 6061 aluminum then powder coated. This BMW motorcycle side stand foot increases the area of the pad to 2.339" x 4.230" to help prevent tip overs. The toe tang makes it easier to access the side stand in both the upright and down position. Screws are stainless steel.
NOTE: Also available in a Black Powder Coat
Search Products

Ilium Works is proud to announce the 29-200 HIGHWAY PEGS for the R1250 GS Adventure.

The factory engine guard bar configuration has presented quite a challenge when it comes to properly mounting a comfortable highway peg. Our new part number 29-200 Highway Pegs address this problem with a unique mounting system. A gracefully curved 1/4" X 1” stainless steel bar connects the upper and lower bars of the factory engine guard and provides a sturdy foundation to mount the highway pegs in the proper location.

The 29-300 GSA Highway peg is offered with the Gripper pad.

Carefully designed Rear Crash Bars to help protect your expensive panniers and mufflers, these minimalist design bars will not interfere with passenger comfort or the clean lines of your R1200RT Oil head, R1200RT Water Cooled, R1250RT or K1600GT / GTL / GTLE.These Rear Guard Bars, Part# 11-800BL are designed to work in conjunction with our P/N 19-600 Highway Pegs to offer the best overall protection for your 2005 – 2013 R1200RT in the event of a drop or tip over. These can also be used in conjunction with other manufacturer’s engine guard...

These Rear Guard Bars, Part# 30-800 / 30-800BL are designed to work in conjunction with our P/N 30-200 / 30-200BL (R1200RTW) or 36-200 / 36-200BL (R1250RT) Engine Guard Bars to offer the best overall protection for your R1200RT WATER COOLED or R1250RT in the event of a drop or tip over.  These can also be used in conjunction with other manufacturer’s engine guard bars as well.  These bars are constructed of heavy wall  (1” X .120” ) steel tubing and TIG welded to 7 ga. cold rolled steel brackets.  After shot blasting with stainless steel media, th...

Powered By Zomix Content Management Systems copyright © 2024