Motorcycle
Motorcycle
Price:
$368.50
27-100
Qty:
Add to Cart
This versatile mounting system allows the use of our popular highway pegs with the NEW 2013 and up R1200GS the 2014 R1200GSA water/liquid cooled, R1250GSA stock engine guards and Ilium Works NEW engine guard bars for the 2014 and up R1200RTW. Also along with many aftermarket engine guards including Wunderlich, Altrider and Touratech. Our unique ball joint design offers a variety of compound angle mounting possibilities that can be configured with either rearward or upward folding. Once positioned the ball joint is then rigidly locked into position. These are CNC machined from 6061 aluminum alloy, anodized and assembled using stainless steel hardware to give you years of comfort and trouble free service. Fits 25mm bars or 22.5mm bars with our spacers. Please specify diameter when ordering.
NOTE:
Highway pegs sold as a pair.
SLEEVE,22.5MM-25MM, Part# 19-XXX is required for 22.5mm bars.
Engine guard bars not included.
Please check out our You Tube Installation Instruction video,
Search Products

Ilium Works is proud to announce the 29-200 HIGHWAY PEGS for the R1250 GS Adventure.

The factory engine guard bar configuration has presented quite a challenge when it comes to properly mounting a comfortable highway peg. Our new part number 29-200 Highway Pegs address this problem with a unique mounting system. A gracefully curved 1/4" X 1” stainless steel bar connects the upper and lower bars of the factory engine guard and provides a sturdy foundation to mount the highway pegs in the proper location.

The 29-300 GSA Highway peg is offered with the Gripper pad.

Carefully designed Rear Crash Bars to help protect your expensive panniers and mufflers, these minimalist design bars will not interfere with passenger comfort or the clean lines of your R1200RT Oil head, R1200RT Water Cooled, R1250RT or K1600GT / GTL / GTLE.These Rear Guard Bars, Part# 11-800BL are designed to work in conjunction with our P/N 19-600 Highway Pegs to offer the best overall protection for your 2005 – 2013 R1200RT in the event of a drop or tip over. These can also be used in conjunction with other manufacturer’s engine guard...

These Rear Guard Bars, Part# 30-800 / 30-800BL are designed to work in conjunction with our P/N 30-200 / 30-200BL (R1200RTW) or 36-200 / 36-200BL (R1250RT) Engine Guard Bars to offer the best overall protection for your R1200RT WATER COOLED or R1250RT in the event of a drop or tip over.  These can also be used in conjunction with other manufacturer’s engine guard bars as well.  These bars are constructed of heavy wall  (1” X .120” ) steel tubing and TIG welded to 7 ga. cold rolled steel brackets.  After shot blasting with stainless steel media, th...

Powered By Zomix Content Management Systems copyright © 2024